Fast connection of the Mobile One. 
After the telephone set is unpacked, connect the power unit in applcable plug on the back panel of Mobile One phone and switch on the power unit into a power socket.
Connect your land line to the slot "TEL IN". Now at removal of a receiver and pressing the key "PSTN/IP" you can call and accept calls as usual.
Connect the first patch cord, to a network card of the computer and to the "LAN/PC" lot on the back panel of phone M1. The second patch cord connect to the ADSL-modem and WAN slot of M1 phone.
Internet connection.
M1 connection can be done in several ways:
1. Fast connection
2. Via phone menu
3. Via Web Browser the computer
1. Fast connection (mode DHCP)
If your ADSL modem is set in a router mode ( DHCP server) simply apply a gray network cable to WAN IP slot of phone and ADSL modem. For the Internet connection plug in the computer to LAN IP slot of the phone.
NOTE. For this connection type all computers of your local network need to be in a mode "to Receive the IP-address automatically".
We don't recommend to use this type of connection with cheap ADSL modem models since some of them don't provide enough stable Internet connection.
2. Via phone menu
If your connection is through ADSL modem it is necessary for you to put ADSL modem in a mode "BRIDGE" and and have within reach login and the password for PPPoE authorizations ( to log on).
Further it is necessary to enter into phone "MENU", then with keys "UP/DOWN" reach the point "4.Network" and press "OK".
Further you will get to a submenu with settings "WAN" and "LAN", choose "WAN" and press "OK".
In the following submenu with 3 settings: "1.IP Type", "2.Fixed IP Setting" and "3.PPPoE Setting". By means of navigation keys "UP/DOWN", choose point "1.IP Type" and press "OK".
In the opened submenu choose point "3. PPPoE client" also press "ОК". Then you will be moved to the previous submenu where it is necessary to choose "3.PPPoE Setting".
Further you get to a submenu with settings "USER NAME" and "PASSWORD".
Press "OK" and enter the LOGIN in section "USER NAME" and the PASSWORD in section "PASSWORD" (UserName - user, Password - test).
Setting example under the scheme:
ATTENTION! If you have entered the phone menu, and done nothing within 5 seconds, phone automatically is back to its general mode. Switching from the menu on upwards level is reached by a single press on the "MENU" button.
If all the steps of the ADSL modem connection have been made correctly (don't forget that it should be in mode BRIDGE) phone will be registered automatically within approximately 30 seconds.
If the connection is made and thereafter the phone is in Mobile One network, Mobile One number will appear on the phone display, and the indicator REGISTER located in the top right corner of phone will go red.
Now phone is ready to work and you can make and accept calls to and from Mobile One network, SKYPE, and also save a fortune on long-distance calls!
If it hasn't happen, check up correctness of options.
3. Connection via Web Browser on your computer.
You can use Web Browser (Opera, Explorer, FireFox etc.) on your computer to set up Mobile One.
Example of connection for Windows XP:
1) Press Start-up, choose the Control panel.
2) Go into Network connections
General control panel
3) Press the right button of the mouse on "Connection on a local network", further come into "the Properties" submenu
4) Choose point "the Internet Report (TCP/IP) and on press"Properties"
5) Choose "to Receive IP-address automatically" and press "Ok". (It is recommended to store settings of the IP-address and gateway had been made before , to overcome unexpected contingency with connection).
6) Open Web Browser and enter the phone access address http://192.168.123.1:9999, when the window with Name and the Password opens, enter data Username - user, Password - test, and press the button "Login".
7) Well done , you have come into the main menu of connection option via the computer, the Web-interface home page "System Information" will appear.
8) In the navigation panel on the left, choose point "NETWORK" and go into submenu "WAN".
9) Before you open the main menu of connection options, you need to press the point "NAT", and to choose PPPoE (most common connection type), in the DNS entry you need to specify IP address DNS servers of your provider or your network, in section "User Name" and "Password" you need to specify the your provider login and password.
After applied changes press the confirmation button "Submit".
10) To store the applied changes in M1 choose "Save Change", further press button "Save",
If all the steps of the ADSL modem connection have been made correctly (don't forget that it should be in mode BRIDGE) phone will be registered automatically within approximately 30 seconds.
If the connection is made and thereafter the phone is in Mobile One network, Mobile One number will appear on the phone display, and the indicator REGISTER located in the top right corner of phone will go red.
Now phone is ready to work and you can make and accept calls to and from Mobile One network, SKYPE, and also save a fortune on long-distance calls!
If it hasn't happen, check up correctness of options.
4. How to go on line with M1:
Adjust the settings of network connection on your computer apply the mode To receive IP address automatically (look section 2. Connection of Web Browser of your computer).
If the phone indicator REGISTER (the right top corner)is on, it means that the connection with the Internet is made, IP phone was registered within Mobile One system and you can go on-line from the computer, connected to "LAN".
NOTE: With this type of connection you have voice prioritization i.e. when you download any data with the greatest possible speed and during this moment you want to call, the high quality of the voice will remain the same the vocal traffic "will clamp" a data link for the period of conversation and will restore speed after the end of the conversation.
