Fast connection Mobile One.
Unpack the adapter, connect the power unit to the applicable slot on the back panel of the Mobile One and apply the power unit to an electric socket.
Connect your land line to the slot "Line", and your phone to M1 adapter slot "Phone" adapter.
Connect network card of the computer and slot "LAN" with patch cord on the back panel of adapter M1. With the second patch cord connect the ADSL-modem and adapter M1 slot "WAN" adapter.
Connection to a network the Internet.
M1 connection can be done in several ways:1. Fast connection
2. Via Web Browser the computer
1. Fast connection (mode DHCP)
If your ADSL modem is set in a router mode ( DHCP server) simply apply a gray network cable to WAN IP slot of phone and ADSL modem. For the Internet connection plug in the computer to LAN IP slot of the phone.
NOTE. For this connection type all computers of your local network need to be in a mode "to Receive the IP-address automatically".
We don't recommend to use this type of connection with cheap ADSL modem models since some of them don't provide enough stable Internet connection.
2. Connection via Web Browser on your computer.
You can use Web Browser (Opera, Explorer, FireFox etc.) on your computer to set up Mobile One.
Example of connection for Windows XP:
1) Press Start-up, choose the Control panel.
2) Go into Network connections
General control panel
3) Press the right button of the mouse on "Connection on a local network", further come into "the Properties" submenu
4) Choose point "the Internet Report (TCP/IP) and on press"Properties"
5) Choose "to Receive IP-address automatically" and press "Ok". (It is recommended to store settings of the IP-address and gateway had been made before , to overcome unexpected contingency with connection).
6) Open Web Browser and enter the phone access address http://192.168.123.1:9999, when the window with Name and the Password opens, enter data Username - user, Password - test, and press the button "Login".
7) Well done , you have come into the main menu of connection option via the computer, the Web-interface home page "System Information" will appear.
8) In the navigation panel on the left, choose point "NETWORK" and go into submenu "WAN".
9) Before you open the main menu of connection options, you need to press the point "NAT", and to choose PPPoE (most common connection type), in the DNS entry you need to specify IP address DNS servers of your provider or your network, in section "User Name" and "Password" you need to specify the your provider login and password.
After applied changes press the confirmation button "Submit".
10) To store the applied changes in M1 choose "Save Change", further press button "Save"
If all the steps of the ADSL modem connection have been made correctly (don't forget that it should be in mode BRIDGE) phone will be registered automatically within approximately 30 seconds.
If the connection is made and thereafter the phone is in Mobile One network, Mobile One number will appear on the phone display, and the indicator REGISTER located in the top right corner of phone will go red.
Now phone is ready to work and you can make and accept calls to and from Mobile One network, SKYPE, and also save a fortune on long-distance calls!
If it hasn't happen, check up if the log in, password, and sequence of settings are correct.
